Thread: Hiboy roadster specs?

Tweet

This pic shows the trailer with my 32 sitting on it.

Note the ramps.
They bolt down with one bolt in the center about a foot from the rear.
There's a piece of channel bolted under the floor with nuts welded on so all you have to do is drop the bolts through the ramp and floor and tighten.

You'll note that the usual cross the rear of the trailer angle iron piece is removed.
It's used to hook the ramps in and the nice part about that is you can slide the ramps together for a lawn tractor or all the way apart for a full size car.

Since my ramps were so wide, I elected to make a pivoting mount for the front of the ramps.
They were constructed so they wouldn't fall off like the hook type mounts do sometimes.