Printable View
Jack (aka Henry Rifle) posted a link for tunning specs on a edelbrock carb
http://www.telusplanet.net/public/g...edelbrock_1.htm
on another post.
Does anyone have or know where a spec like that is for 3 deuce units? Rochester 2GC units preferably.
Thanks
ttt
Rocknrod. Are you using progressive linkage? If so you need to do away with the Power Valves in the two outter carbs plus the idle circuits on those two carbs. That's number one. Then up the Primary size jets on the second carb one or two steps (depends on the size of your motor) and weaken the spring on the power valve actuator. Other than that I can't help you, but those are the carbs I am running. (I cheated, I bought the 3x2 carb conversion kit from Speedway for the 2GC's).:) :) :)