where are the block numbers

Quote:

---

Originally posted by TRUCKGUY
ok thanks i will see if i can get that stuff .
oh and another Question what does a blower do for a engine????

---

Forced induction of air/fuel mixture. Go fast add on. Make sure you have all the best of everything or your motor will go south. :3dSMILE:

____________________
Alan

Ok so if i wanted to put one on my littel motor what type of parts would i need i know you have to have a specail pistons and stuff dont you like do i have to have a speacl cam and stuff to???????????????

thanks

Quote:

---

Originally posted by TRUCKGUY
Ok so if i wanted to put one on my littel motor what type of parts would i need i know you have to have a specail pistons and stuff dont you like do i have to have a speacl cam and stuff to???????????????

thanks

---

Yes, you pretty much need to build an engine around the blower. Even the blower has to be driven as to the right amount of boost which is done with different pulley sizes. You need forged pistons with a compression ratio around 8:1 +or -. Cam grinders offer different profiles depending on compression, boost, ect. Its kind of an art as to doing the right combinations of everything, somthing I've not had much experience with. It's a "ball game" better left to someone with a lot of knowledge or your going to be on the loosing end. :whacked:

Alan