MikeP wrote:
Hopefully rhe block has not been decked, as the millimg prosses will take off the numbers.


Hi
That's good advice Mike! Thank's! I had a 010 block that has factory nodular 4 bolt main caps. Needless not say, I had it bored and the machinist took .010 off the deck. Dummie me didn't write down the numders that are on the front passender side of the block, dang-me. I do know it was cast in 69. I aslo have a 4 bolt 454 block that I bought from my machinist. Same story, he decked it before I ever saw it, bummer.

Also *Salute* too the Al Show
Mortec is a great site, the links are good also! I've used Mortec for a few years now and find it's info valuable.

Respectfully
Monte