23Likes
Results 1 to 15 of 29
LinkBack URL
About LinkBacksThreaded View
-
06-08-2023 02:59 PM #1
CHR Member
- Join Date
- Jun 2023
- Location
- Reno
- Posts
- 14
Heads for 350 SBC in '65 El Camino. Will these work?
I have a gen 1 with this cam:
https://www.summitracing.com/parts/tfs-31401001
Says minimum 9.5:1 compression ratio.
I'd love it if the $350 Vortec heads below would be decent, but...Not sure my exhaust and intake will bolt up. It had the 624 stock heads before.
I have the shortblock and this is really a quick fix to get the car back on the road, so I'm looking for the best power/ cost value here, not necessarily max power. Fit to cam matters.
Will any of these heads work?
Summit Vortec iron 67cc:
www.summitracing.com/parts/sum-151124
...or Flotek aluminum 64cc chamber 180cc intake:
https://www.summitracing.com/parts/flk-102-505ft
...or Summit Racing aluminum 65cc chamber 200cc intake:
https://www.summitracing.com/parts/sum-162sbcstrft
Last edited by cletus141; 06-08-2023 at 06:27 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I had to go to the doctor's this morning. He told me that my sugar was too high so I came home and put it on a lower shelf. I feel better already.
the Official CHR joke page duel