Thread: Need some help with sbc 350 set up

Tweet

And yes I know about the different size pushrods, I bought a whole topend kit. Fully assembled heads matching dual plane windage intake, true 1.5.1 roller rockers. The kit came with an adjustable pushrod tool also.

Originally Posted by Angry78K20

And yes I know about the different size pushrods, I bought a whole topend kit. Fully assembled heads matching dual plane windage intake, true 1.5.1 roller rockers. The kit came with an adjustable pushrod tool also.

You're doing this right - you'll have a noticeable difference in pulling power as well as the 3500-5500 RPM range. Take her for a romp without the caper and you may be surprised at your 0-60 acceleration.