Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree4Likes
  • 2 Post By johnboy
  • 2 Post By shine

Thread: SBC head bolt question
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    Sgmacaulay is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Mar 2020
    Location
    Denver
    Car Year, Make, Model: 1950 Chevy 3100
    Posts
    2

    SBC head bolt question

     



    I have removed the AC from my SB engine the bracket was attached to the head and the water pump. I am replacing the bolt through the water pump but do I need to “plug” the threaded holes in the head?

  2. #2
    johnboy is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    Tataraimaka NZ
    Car Year, Make, Model: `47 Ford sedan, A.C.Cobra replica.
    Posts
    2,630

    Whenever I'm working on a machine and remove a bolt from wherever and am faced with that dilemma, I poke a six inch nail into it.
    If it bottoms out don't worry about it.
    If it doesn't...plug it.
    NTFDAY and 36 sedan like this.
    johnboy
    Mountain man. (Retired.)
    Some mistakes are too much fun to be made only once.
    I don't know everything about anything, and I don't know anything about lots of things.

    '47 Ford sedan. 350 -- 350, Jaguar irs + ifs.
    '49 Morris Minor. Datsun 1500cc, 5sp manual, Marina front axle, Nissan rear axle.
    '51 Ford school bus. Chev 400 ci Vortec 5 sp manual + Gearvendors 2sp, 2000 Chev lwb dually chassis and axles.
    '64 A.C. Cobra replica. Ford 429, C6 auto, Torana ifs, Jaguar irs.

  3. #3
    Sgmacaulay is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Mar 2020
    Location
    Denver
    Car Year, Make, Model: 1950 Chevy 3100
    Posts
    2

    That sound advise, seems to make sense.
    Thanks!

  4. #4
    Driver50x's Avatar
    Driver50x is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2016
    Location
    Saint Petersburg, Florida
    Posts
    429

    Usually the only bolt hole you have to plug on a small block Chevy is the one on the front of the block, right by the fuel pump.
    Steve

  5. #5
    shine's Avatar
    shine is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,109

    keep in mind the bolt above the fuel pump is for holding the pump drive shaft. the plug bolt is short and replaced with a regular bolt to hold the shaft up when replacing the pump . plug it with a short bolt .
    NTFDAY and Driver50x like this.

Reply To Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink