Thread: ebay hydraulic roller lifters

Tweet

Originally Posted by figure8

Thanks for the input. I better pass on the cheap lifters. I will get a hydraulic flat tappet kit from Elgin, Howards or Summit. Sure it will work fine.

Or Isky. The trick is to break the cam in with used and practically worn out springs. I have a Howards in the garage I plan to put in the 350 in a 76 Corvette. If it was running a 4 speed i would not hesitate to put in a 30-30 Isky that was ground in 64 and has been in 3 different engines. It's a solid lifter cam and I think it's too stout for an automatic.