Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree3Likes
  • 2 Post By ted dehaan
  • 1 Post By shine

Thread: Starter help needed
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    Larry Owen is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2018
    Location
    Terra Ceia
    Posts
    3

    Starter help needed

     



    Great to me a new member! I have a sbc 350 in my 1977 Aquacraft 222 boat, and I need a new starter. The pad has two studs extending for mounting, and 2 nuts tighten the starter down. I don't know the exact year of the engine but sure it is an ".....01" (or 10?), most likely from the 70's. Flywheel teeth count is also unknown. I'm basically asking what regular or mini starters fit the 2-stud mounting pad? Larry

  2. #2
    ted dehaan's Avatar
    ted dehaan is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    whittier ca.
    Car Year, Make, Model: 32ford5w,60fordstarliner,55chevy65corvai
    Posts
    645

    If that boat has a closed bilge you have to replace it with a marine cert. starter by law it is covered under N.F,P.A 302 that is national fire protection act covering marine applactions
    glennsexton and Driver50x like this.
    I'LL KEEP MY PROPERTY, MY MONEY, MY FREEDOM, AND MY GUNS, AND YOU CAN KEEP THE CHANGE------ THE PROBLEM WITH LIBERALISM IS SOONER OR LATER YOU RUN OUT OF OTHER PEOPLES MONEY margaret thacher 1984

  3. #3
    NTFDAY's Avatar
    NTFDAY is online now CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,342

    What's wrong with the one that's in it?
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  4. #4
    shine's Avatar
    shine is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,112

    i'm a dinosaur i still have them rebuilt . you end up with a better starter .
    NTFDAY likes this.

  5. #5
    Matt167's Avatar
    Matt167 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Prattsville
    Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
    Posts
    4,990

    Yeah, the rebuild kit is cheap, and there is likely an electric motor shop somewhere near or in a bigger city.

    If you really want a mini starter, Mercruiser's starters are all mini starters now. But you will need your engine serial number to verify the right one. If you have an OMC from the 70's, then I feel sorry for you,
    You don't know what you've got til it's gone

    Matt's 1951 Chevy Fleetline- Driver

    1967 Ford Falcon- Sold

    1930's styled hand built ratrod project

    1974 Volkswagen Super Beetle Wolfsburg Edition- sold

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink