Thread: *350 sbc Valve Ajustment*

Tweet

Originally Posted by NTFDAY

It will run but like crap. Try running .008 on the intake and .0012 on the exhaust.

Thanks. There is a lot of mixed answers on what they need to be set at from some of the other forums so I think I'll start with .020 and see how it goes.

Originally Posted by zippi

Thanks. There is a lot of mixed answers on what they need to be set at from some of the other forums so I think I'll start with .020 and see how it goes.

The setting I gave you are for a 63 "Fuelie" cam I had a long time ago. The most radical I can think of is the 30-30 cam used in the 64 Corvette. I have looked at your post on hotrodders and as usual the so called experts over there are all over the place. Good luck.