Thread: Identifying Piston Rings
Results 1 to 5 of 5
LinkBack URL
About LinkBacksThreaded View
-
10-06-2018 01:38 PM #3
CHR Member
- Join Date
- Jul 2010
- Location
- Saskatoon
- Posts
- 43
I’m showing the ring faces.
Both rings have an inner bevel as installed upwards in both lands.
Inner bevel is the same as M, PL and HC
Ring surfaces appear to be flat and the moly is shown in the picture.Moly is much wider than any of the rings you have shown. Again, top ring has moly sandwiched between two fine strips of iron. Second ring is almost full moly faced below a thin strip of ironLast edited by H.O.Rider; 10-06-2018 at 01:42 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
A belated Happy 78th Birthday Roger Spears
Belated Happy Birthday