Thread: Engine spraying oil at high RPM
Hybrid View
-
02-22-2018 12:28 PM #1
- Join Date
- Apr 2011
- Location
- Prairie City
- Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
- Posts
- 7,301
- Blog Entries
- 1
Too bad you can't put a gopro or similar camera under the compartment lid and go give it a wack or 2 on the water. does your oil fill cap have an o ring on it? Is that a vented cap? I've seen some of those on some BBC boats and they have an orifice drilled through the top edge to the center as a vent. My friend had a massive Baja with 2 502s and it kept blowing oil out after he had the engines replaced. A guy down at the Lake of the Ozarks showed us the fill caps. He swapped a pair from his boat and the problem went away. After that he heard of others having similar issues too. I'm not sure if it was an incorrect shipment from a supplier or what. I'm not sure if that is your problem but it is something to look at.Last edited by 40FordDeluxe; 02-22-2018 at 12:31 PM.
Ryan
1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
Tire Sizes





3Likes
LinkBack URL
About LinkBacks
Reply With Quote
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!