Hi, first off I'm new to this forum! Im 24 years old and I don't have much mechanic background in me. My Grandfather was a mechanic and also my uncles ... recently I got into it with a 350 sbc ! I built one brand new and working on the wiring. Now the vehicle is a JEEP. This is something my grandpa did and I loved his so now I'm all in.

So, what I want to do is run a separate harness for my ignition. Reason for this is because I'd like to go with a toggle switch/push button panel. Many folks have done this... but I'm running into some issues. I don't really clearly understand how this will work.

Can I run a separate "ignition switch" (being the panel?). I undertand how it works and what gets hooked up... starter, bat., ground(s) etc. My issue is the distributor ... where do I connect it or how can I? Can I run it just to the fuse box?

If anyone can help me out with some ideas... the reason I don't want to splice into the original Jeep harness is because I'm trying to eliminate it.

If you don't mind helping out or making suggestions that would be appreciated!

MAIN ISSUE: getting a 350 sbc to START off a toggle switch/push bottom panel!

Thanks,
-_____________________________________________________________________-
Hickey17
Respect Each New Sunrize!