1LikesThread: Timing mark question
Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
11-05-2016 03:06 PM #1
CHR Member
- Join Date
- Mar 2016
- Location
- Kent
- Car Year, Make, Model: '54 Kaiser, '63 Avanti, '59 Rambler
- Posts
- 44
My Social Networking
Timing mark question
Guys - I'm breaking in my fresh 350 and prefer to adjust the distributor position when I'm not trying to hold the RPMs up simultaneously.
If the mark is seen south of where I want it, by the timing light, in which direction will I tweak the distributor to bring it up a little?
Thanks!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-05-2016 04:55 PM #2
CHR Member
- Join Date
- Mar 2016
- Location
- Kent
- Car Year, Make, Model: '54 Kaiser, '63 Avanti, '59 Rambler
- Posts
- 44
My Social Networking
I'm in the driver side fender and yes, using a vacuum advance off the Edelbrock.
-
11-05-2016 05:16 PM #3
CHR Member
- Join Date
- Jun 2007
- Location
- New Market
- Posts
- 2,590
are you asking which way to pull the dizzy to advance the timing ?iv`e used up all my sick days at work .. can i call in dead ?
-
11-05-2016 07:15 PM #4
CHR Member
- Join Date
- Mar 2016
- Location
- Kent
- Car Year, Make, Model: '54 Kaiser, '63 Avanti, '59 Rambler
- Posts
- 44
My Social Networking
That's very helpful. Many thanks!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build