Thread: Brodix IK Heads.

Tweet

Hi Techinspector, thank you for all the information, i had posted you back but for some reason it still has not shown..

My block is decked piston to deck is .005 i was going to use a .039 gasket.

After reading your post i am looking into the pro filer heads, 72 cc, that should put me at around 9.5:1 SCR abd 7.8:1 DCR..Will the 185cc be a little too much for me? 350 bored .040 over.

thank you again I was a little confused with the Quench so let me see if i got it now..
piston to deck height .005 + head gasket .039 = .044 that should be ok ? Need to stay within .035 & .045 right?