Thread: 350 sbc wont start
Results 1 to 15 of 38
Threaded View
-
09-29-2014 06:27 PM #13
so pulled timing cover marks were way off, got it right. pulled plugs cranked strong. put plugs back in was still cranking good, checked distributor was still on pointing to #1 at tdc put wires on checked twice cranked slow and back fired through the exhaust. i mean louder then i ever heard? still timing or valves to tight?





17Likes
LinkBack URL
About LinkBacks
Reply With Quote
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!