Thread: HELP... im building a 406
-
06-23-2014 07:21 PM #1
HELP... im building a 406
alright so its been a while and I'm just getting back into the game. I have recently owned this 91 firebird with a 406 and just bought it back. It is not running the best and the engine is in need of tlc. I sold it the way it is and it was never really tuned right. I know some things are wrong and now its time to start fresh, the motor has a lunati voodoo 60105 cam specs are: lift is 525/546 with an advertised duration of 284/292 and 241/249@.50. I know my compression is a little low so I need to bump it up to about 10.5-1. I need a little advice on a good setup(heads, intake, and carb) to compliment the cam and keep it somewhat streetable. It is not a everyday driver just a weekend warrior to go out and have fun with and sometimes go to the track. I was possibly thinking about stepping down one cam size but would like to stay with this one cuz I do like it.. Somebody help please I need some advice
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project