Thread: Freebie four bolt

Tweet

Ok, thanks so far. But can we dumb it down a lil more. One of the problems I've found searching the forum is the tla's (three letter acronyms). I don't yet speak the language. So down to the basics, should I be looking at buying a kit with pistons and the whole deal? Where do I start?

Originally Posted by Willawolfe

Ok, thanks so far. But can we dumb it down a lil more. One of the problems I've found searching the forum is the tla's (three letter acronyms). I don't yet speak the language. So down to the basics, should I be looking at buying a kit with pistons and the whole deal? Where do I start?

take block to the machine shop there are things your can not do at home so they will help you with things you do not know . if they can not. then that is a good place not to go . you will just buy parts for size needed after machine work like a 030 over pistons or bearings . all parts you buy are going to be for a 350 chevy piston s are base off the CR your going to use and what grade of fuel your going to use. you do not buy any kit till the parts are at the machine shop so you know were parts would be for size