Thread: Changing Deck height

Tweet

Originally Posted by rspears

Pat, I wasn't saying you're BS'ing, or anything about your post at all. I was simply pointing out that, in my opinion, Tech's advice about squish is dead on accurate and very easy to understand. He's only explaining "squish", and I think he did it in a way that makes it very clear how the component parts, including the head gasket, need to be considered in establishing deck height. Your points about line boring to set the foundation for the build are dead on, too.

HEY i did got think that but he never asked about squish ?? more about PV??? the guy was asking about the deck the piston CH /CD tell were you put the deck at the point if you have a block thats not way off from good old GM then you can be 005 or 0.010 in the hole . but when you start to square the block you can not move it so some times head gaskets are what you end up with on paper is sound geat run to the shop tell them just cut 010 off then i be at 9015 call it a day just saying a old block it will not always work that way less you have 20 to pick threw your going to dance with the girl you took to the dance ????