Printable View
Ok guys I got a 327 Chevy Small-block that I want to install a oil cooler on, I removed all the hardware and now im at dead-end where I can't install it due to the Strangest Problem ever.
As you can clearly see the actual threads are deeper in there and i can't find anything that will help me install it... Please help.
http://img607.imageshack.us/img607/7426/dscn0238h.jpg
Never mind guys close this Thread please, I resolved problem last-night and ordered a oil-spin off adapter kit.
I can at least say welcome to the club. Glad you figured it out and thanks for letting us know the solution. How about a picture of the project vehicle?
Ok, I will do that where do you want me to post it.. I could make up a project Thread right? Got over 500+ Pics of my car and have been doing tons as the days go on :)
Sure! Start a thread, it'll be fun to share'em! "We" are picture hogs.. can't see enough of'em! rofl..
my next mods are rear gears, 6 speed swap, cam and a few others :)
Welcome to CHR, good having you here! What kind of car is the engine in? Looking forward to updates on your project, sounds like you have a lot of plans for the car!
Sounds fun! Can't wait to see the pics!!Quote:
Originally Posted by Anthrax50551
Yep, the adapter will come with a NPT nipple to go into the filter area, or some of them (better higher priced ones) actually have you remove the bypass plate and bolt it into those holes......much more stable in my opinion....
^ Thats the Kit i got lol
you have to take that inner part thats bolted to the block out.....then bolt the adapter in its place.....
I know I just installed it and its great.
I need the same for my 327, where did you get yours from and what brand/model was it ? Thanks.