Thread: 355 vortec
Results 1 to 5 of 5
LinkBack URL
About LinkBacksThreaded View
-
02-13-2013 04:33 PM #3
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
What are the complete cam specs?
What vehicle?
What intended purpose?
What rear gear?
0.480" lift is pretty mild. If the rest of the cam specs are this mild, I'm guessing you have a mismatch of parts. 10.79:1 will require a cam with somewhere around 235-240 degrees duration, operating from 3200 to 7000. Do you intend to operate on pump gas with iron heads at 10.79:1? If so, you may be in for a rude awakening.
Now, to answer your question, an Edelbrock RPM intake mounting a 750 carb. Vacuum secondaries if you are using an automatic trans with converter stall at 3000 or less. Double pumper if the trans is manual or the converter stalls at 3000+. (Lynn was posting while I was typing)
Last edited by techinspector1; 02-13-2013 at 04:38 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! - -
John Norton aka johnboy