HEY>Did look at angle adapter and although I think it might work, I was hoping to maybe just find an adapter that would allow me to just use a smaller diameter filter in the same location and orientation as is stock, I haven't found anything on the Suburban filter adapter yet but I am looking. I will try to take a pic shortly and post but for the moment just picture spinning on a filter that is about an inch less in diameter than the stock one and although we all know it would not seal, I would have the clearance I need. The angle unit may cause the filter to be way to close to the headers as it would have to face front because of clutch slave cylinder behind filter. A remote is an option but as I said things are pretty busy in this corner and it would be a stretch to make the line connections and routing in a clean and elegant manner. The corvette unit actually offsets the filter to almost touching the pan. S10 to V8 swaps have been using this for years but I have not been able to locate one for my use. If anyone has one of these, let me know. Thanks PJM