http://m107.photobucket.com/albumvie...SRF61jDu0cc%3D
Printable View
Naaa don't use that one ;)
this Edelbrock Performer EPS Intake Manifolds would make the best Low end Torque and also not give up H.P up to 5500 . It's one up on the old #2101 Performer Intake and on a Mild SB Chevy it's as good as the RPM Intake up to 5500 . Not Long ago it was the Budget priced SB Intake . I think as it showed it's worth it's Cost went up as well .
Edelbrock 2701 - Edelbrock Performer EPS Intake Manifolds - Overview - SummitRacing.com
We used an Edelbrock Performer #27014 manifold ......... cost less than $200 at Summit ........ perfect match for the Edelbrock 600 cfm carb
http://i74.photobucket.com/albums/i2...10thames15.jpg
I also had a 327 with a Comp 270 Magnum cam a few years ago in a '29 Ford roadster with a TH350 and 2400 stall converter. Excellent performance, lopey idle, and a lot of fun to drive. I highly recommend it.