Thread: Building an 18 degree motor....
-
08-13-2011 05:35 AM #1
Building an 18 degree motor....
I have a very nice 421 small block w/ Dart block. Can a competent engine builder, with the proper machining, turn this into an 18 degree motor, re using the heads and just using new pistons?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-13-2011 05:43 AM #2
i would think not the same cam ? lifters. shaft rocker . push rods. intake .head studs .pistons what head brodix or dart ? brodix you can get away from shaft rockers but are nice to have when you going up on spring LBsLast edited by pat mccarthy; 08-13-2011 at 06:10 AM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project