I don't have a side shot and it's partially disassembled right now. I used a long bed frame and the wheels line up nice in the center of the wheel wells, had to add 3/4" to the overall length, stretched the running boards. The front was a little narrow, used 8" wide wheels with a 3.5" backspace. The frame had to be narrowed about 14" where the original cab mounted. The rears are tubbed a few inches. It's got a fuel cell mounted at the front of the bed under the floor with a lid that tilts for fuel fill up. It's got a power rack & pinion out of a '95 Intrepid, the tie rods mount in the center of the rack so there's no problem with bump steer as the tie rods are plenty long. I was able to use the stock outer tie rod ends and steel tubes with heims for the inner.

Nice looking truck, wish mine had been as straight and complete as yours, but it only cost me $600.