Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: SBC 350 build
          
   
   

Results 1 to 15 of 49

Threaded View

  1. 02-13-2011 07:58 PM #13
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by FMXhellraiser View Post
    Tech, on my TRW flat tops .030 over with 4 valve reliefs, it says 9.6:1 compression ratio with 64cc heads. Are you saying that is not true? I know that sometimes the specs on the directions or Summit are not correct and I have always thought this to be true with 64cc heads and also that would also assume that my deck has NOT been cut down any.
    the speed pro book shows were its parts number will be at given deck height. many pistons makers will move the C.H on a flat top if the cr needs to be some what close as the bigger bore gets the more swep volume more CR .with domes they adjust the CR by moving the dome .many do this so you need to deck to O or 010 to be were you want . I do it all the time
    Last edited by pat mccarthy; 02-13-2011 at 08:00 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink