I am building a 383 sbc (010) block bored .030 with speed pro powerforged flat top pistons with 2 reliefs 11.5 or 12.1 cr .039 felpro head gaskets, eagle 3.75 crankshaft with eagle 5.7 rods, arp rod bolts, balance rotating assembly, ZZ4 GM performance 210cc aluminum heads 2.02 int. 1.60 exh. 58cc chambers, comp cam hyd. 244 244 @ .50 510 510 lift 108 lobe center, crane 1.5 roller rocker arms, crane 1.565 double springs, 7/16 screw in studs and 3/8 guide plates, crane stud girdles, double roller timing chain, world performance high rise single plane intake, holley 750 duel feed carburtor, what HEI distributor to run and what advance should be used, how much hp and torque will this make, thanks Bill