Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: bone stock 350 upgrade questions
          
   
   

Reply To Thread
Results 1 to 11 of 11

Hybrid View

  1. #1
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Just a suggestion....

    Before you do anything to the engine, might want to determine what condition it's in...How many miles on it? Does it use any oil? Any leaks? Then it would be a good idea to do either a compression check or (better yet) a leak down check...

    The key words to me are "recently purchased".... Do you know the history of the truck? Is it the original engine or did somebody drop in a 305 when the original died...Seen any number of 305's passed off as 350's to an unsuspecting buyer! Might want to get the casting numbers off the block and heads and make sure of what you have, first...
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  2. #2
    unklslam41 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2010
    Location
    petersburg
    Posts
    16

    also what can i do to help on cold weather starting. whenits really cold out she is hell to stay runnning for a few minutes. once warm its fine. motor is in great shape. 28k on motor

  3. #3
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    I don't know whether it's bad kharma or what, but I have never had an electric choke that worked the way it was supposed to and I guess I was never smart enough to make it work properly.

    Every carbureted vehicle I have owned for the past 40 years or so has had a manual choke on it. If it didn't have one when I bought the vehicle, it had one shortly after.

    Universal choke cables and brackets are available at most any auto parts store. Just remove the electric gizmos and install the cable onto the choke lever. You can usually find a hole in the firewall to run the cable back to the dash. If not, half a minute with a drill motor will fix it. Be careful and check to see if there is a heater core or some other valuable item that you are about to drill through. A couple of times, I have gotten real fancy and installed a microswitch operated by the choke arm that lights a yellow or red light that I mount on the dash somewhere to remind me that the choke is applied. If you want to get real fancy, you can rig in a flasher that flashes the light while the choke is on, but that gets a little tiresome. The 12v microswitch, light and flasher are available either at the auto parts store or Radio Shack.

    The part I like best about a manual choke is that it's up to you. You can have no choke, a little choke, more choke or max choke any time you want it, unlike an electric choke that only works on whether the actuating coil is warm or cold.

    One last thought about your quest for a livelier truck. I forgot to mention that an aftermarket torque converter would be a nice addition. Anything up to about 2500 stall will be very streetable and you will really notice a difference in accelleration. Even the first stage 2000 stall converter will increase your grin factor. Fuel mileage will suffer and you'll want to install a good quality transmission cooler in front of the radiator, but you'll like the results.
    Last edited by techinspector1; 12-05-2010 at 04:08 PM.

  4. #4
    unklslam41 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2010
    Location
    petersburg
    Posts
    16

    will i see a noticeable difference from adding a intake

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink