Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: need help on a cam for a 355 S.B.
          
   
   

Results 1 to 8 of 8

Threaded View

  1. 11-17-2010 07:13 AM #5
    rumrumm's Avatar
    rumrumm
    rumrumm is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Macomb
    Car Year, Make, Model: '32 Ford 3W Coupe, 383 sbc
    Posts
    1,593

    Crower has a cam #03311, 238/242 degrees @ .050; .524/.532 lift; power range: 2250-6000 rpm; redline: 6500 plus; ground on a 107 degree lobe center. This cam should work with your present components, and the Rhoads lifters should tame it somewhat for the street. Ideally, it would probably like a little more compression, but you should notice a big difference in the amount of torque it will produce.
    Last edited by rumrumm; 11-17-2010 at 10:04 AM.


    Lynn
    '32 3W

    There's no 12 step program for stupid!

    http://photo.net/photos/Lynn%20Johanson
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink