Thread: Questions about a 327 block.
Results 1 to 5 of 5
LinkBack URL
About LinkBacksHybrid View
-
11-10-2010 02:39 PM #1
CHR Member
- Join Date
- Oct 2010
- Location
- my keyboard
- Posts
- 87
The can in the lifter valley can be removed, if the there is a plug (metal frost plug) at the back of the block where the old draft tube was placed. You must the use a 350 style pcv valve (try a 1968 327 pcv valve from your auto supplier) in one valve cover and a vent in the other. Like the old 350's had.
PCV old draft tube hole
350 style PCV Valve setup
Jalopyjournal early sbc PCV valve thread
There was an old GM conversion kit which is not available any more.
See below.
GM PCV conversion kit
This was used with a push on breather cap on the filler tube at the front of the intake.
I hope this helps you
Last edited by Two8tyThree; 11-10-2010 at 02:42 PM. Reason: update
______________________________________
The road is long with many a winding turn.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
time for a new forum to visit. when they sold sr.com it went down hill fast. no more forum just a cheap site selling junkie cars. the canadians killed hr.com. mods are real pricks. as with any site...
Where is everybody?