Update 10/27/10 I went with the Comp Hi-Tech Stainless steel rockers with a 1.5 ratio. Note: Tech staff at Comp says they have not reported any troubles with these rockers going for well over 50,000+ miles with a mild cam and mild seat presures like mine.
Maybe just a sales pitch but i'll find out.

Checked ALL 16 valves for geometry

I used a soild lifter and an adjustable push rod(7.5-8.7) with a black felt tip pen. I have 5 that did not have a real good pattren(centered and narrow) on valve tip and may need a shorter push rod.
A local racer says change out the 5 studs first before buying differant push rods? Is there anything to this theory?