Thread: Chevy 4.3 V6 oil pan question

Tweet

Now if only you guys could figure out how to size your pictures soooooo it wasn't like a wide view of 60 days around the world.Ya know,not all of us have a 60" wide screen TV for a monitor.

Old guys like me just get threw looking at one part of the pix's and by the time I get to the end of it,I forgot what was on the first part.

Again, I apologize for being so "Digitally Challenged". I won't attempt to post any photos on this page of the thread, so maybe it will stay the proper size.
I truly am sorry, I post photos on the 'net all the time, and AFAIK, this is the ONLY website I have problems with...I've gone back and looked at some of my other posts on other forums, and the photos are fine.
Thanks for all the help, and the patience with my downloading dumb-ness.
BTW, I know know that the engine is a 1997, according to the block casting numbers, it was from a 1996-1998, it is a Vortec, and according to the previous owner that pulled it out of his Model A Coupe, it came in the coupe as a 1997 crate motor.
So now, I gotta find, a steel oil pan, preferably with a more shallow sump, and the pickup to go with it, that will interchange with the aluminum pan that is on it now.

I'm not sure how deep this pan is, but you could call and ask then compare it to your current one.

http://cgi.ebay.com/ebaymotors/Dorma...Q5fAccessories

Don

Don't know if this will fit but CFR Performance has chrome ones.

http://www.cfrperformance.com/1986_9..._p/hz-7466.htm