Thanks for the help guys. I will open it up tomorrow and check side movement at 0 lash to see if anything offending. I will check the clearance and movement of the rocker roller. Think when I took the shot I was moving the rocker side to side so it might have ended up against one side of roller.

I was also going to check bleed down of the lifter. I assume if it is at rest in the heel of the cam, the lifter should bleed off. If at mid point I should not be able to turn the polylock without the valve moving downward, hence hydraulic lock. Would that work to determine lifter is bad and bleeding out while running? Has anyone tried this?

Let you know what I find. Thanks again for the suggestions.
Jeff