Hi Guys,

Found these two cams, I will give you the numbers. This is what is hard for me to understand, so with the info earlier in this thread of my engine, car combo,
basically-
355, hyper pistons(d-cup), 9.0:1 comp., 3500 lb. car, 3.89:1 gears, 2200 stall.
Other info in above posts, don't want to repeat too much.

These two roller hyd.cams:

#1-dur@.050 234/238 - adv. dur. 296/300 - 112 lobe sep. .539 int/.548 exh.

#2-dur@.050 226/234 - adv. dur. 258/256 - 110 lobe sep. .525 int/.532 exh.

With these specs what can I expect with these cams for a street engine, manners, sound, one hve more torque or hp than the other?

Don't even know if this is a fair question.

Thanks if anyone can help.