Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 383 stroker
          
   
   

Results 1 to 15 of 19

Threaded View

  1. 06-10-2010 08:48 PM #1
    84transamdude
    84transamdude is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jun 2010
    Location
    Manchester
    Posts
    6

    383 stroker

     



    Hi new to the forums here and was wondering if you guys could help me estimate my hp/tq.


    383 stroker with flat top pistion.
    64cc heads, stage 1 ported, and valve size undiced at this point either 194/150 but most likely will be 202/160 if you can give me numbers for both that would be great.
    cam: hi rev from 2800-6000 int/exh both 224 and lift both 436
    going with and edlebrock dual plane air gap intake
    750 cfm carb. havent decicded wether to go with edlebrok or holley

    thanks Tom
    Last edited by 84transamdude; 06-10-2010 at 08:52 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink