Thread: fuel injection on 350?

Tweet

CHEAPEST and easiest to maintane would be to gather everything out of late 80's erra caprice or pickup that was running the single injector throttle body.
Of course you would need the ECM,wire harness, all sensors ect.ect.

Well if you want to spend some money,Edelbrock has a EFI system.But it is costly and you got to be careful buying used systems off Ebay because some of the older systems are not supported by Edelbrock any longer so parts are not available any longer for them.True enough the TBI's are simple to work on,but are limited in their performance abilities.The stock sequential system from 1996 are a pretty cool system to work with.Gains in torque and HP to be had.Heads for them used a 8 bolt intake vs the early heads that used 12.