Thread: 400 tpi w/ vortec heads?
Results 1 to 15 of 19
LinkBack URL
About LinkBacksThreaded View
-
06-12-2010 06:34 PM #15
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
well the block can crack if you weld it .then add that to your list of horrors as it will leak oil like that well out in the gulf .get the holes wrong or grind to much then your block is junk as well . as you look at you block now your main oil gally or water jacks are fine so as you start down this path you outcome could be good or wast of a good block and time or just buy a set of retro lifters. good luckLast edited by pat mccarthy; 06-12-2010 at 07:15 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!