Thread: horsepower estimate please

Tweet

Originally Posted by josh bichard

355 cid with stock crank and rods and dished pistons, not sure how dished, but the guy said it was making around 10 to 1 compression.

engine quest vortec conversion heads, not ported, 1.94intake 1.5exhaust valves.

elgin 327/350 horse cam. 1.6 jegs brand roller rockers

edelbrock performer rpm, not the air gap. holley 700 cfm double pumper and holley 80 gph mechanical fuel pump

jegs streetfire distributer with 42,000 volt coil, vacum advance and it said its got a different curve"not too familiar with curve kits"

hooker shorty headers with 1 5/8 primaries and 2 1/2 collectors and a hooker high flow y pipe

You would have Right around 9.5.1 with Steel Shim .016" Head Gaskets . This Engine if Tuned Right can Make up to 360 H.P . Good Heads For that Set up Good Intake the 1.6 Rockers add to that Camshaft's Lift That 700 D/P will work Fine Stock 350's Had 750CFM Q-Jets and they work real Well