Thread: smallblock cam selection

Tweet

I had a buddy call and tell me he's got a 351M for me if I want it.
And I have some extra stuff laying here that I picked up and some I
got when I bought my cleveland motor. Most stuff will interchange
except the rods crank and intake. I've got a Erson cam Laying on
the shelf that will fit it. It's a TQ 50 series Erson But is probably to big
for everyday driving.
ADV.296 in./306 ex.
@50. 228 in./235ex.
gross lift. 545/545
center lobe. 110
springs 95 pounds closed and 315 pounds open.
Thinking of getting a crank kit for a 400 and putting in the block
since the 351M and the 400m blocks are identical. Kurt

Pay attention to the 0.050" timing and forget the advertised duration. Unless you have the timing card, you don't know if they calculated the advertised at 0.000" or 0.004" or 0.006" or ?????? Looks like a streetable cam to me.