Results 1 to 13 of 13
LinkBack URL
About LinkBacksThreaded View
-
08-08-2008 10:19 AM #7
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
The 327 350hp L79 cam had single pattern duration of 222 degrees intake and exhaust, 0.447" lift intake and exhaust and was ground on a 114 degree lobe separation angle.
With 8.2 static compression ratio, this cam will result in 7.2 dynamic compression ratio. For this cam to work properly, the motor will need 9.5 to 10.0 static compression ratio. If you're gonna retain the blower pistons, back off on the cam. Or retain the cam and change pistons.
Good luck.Last edited by techinspector1; 08-08-2008 at 11:00 AM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!