Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Block Repair
          
   
   

Results 1 to 14 of 14

Threaded View

  1. 02-21-2008 11:03 PM #8
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by Racecar100
    Never had any leak with fiberglass resin. Just tilt the block over to the side while on engine stand and put a piece of duct tape over the hole and mix the resin and hardner and pour it in until about 1" deep.
    in time it will crack been there did that .block rock is much better moves with the block were the resin can not if you use resin i still would plug the hole with a pipe plug
    Last edited by pat mccarthy; 02-21-2008 at 11:18 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink