Threaded View
-
02-03-2008 12:02 AM #1
Finishing My 383 Sbc Stroker,cam And Intake???
HI GROUP! IM READY TO FINISH MY ENGINE BUILD AND I REALLY NEED SOMEONE TO SUGGEST THE BEST CAM AND INTAKE TO USE TO MAKE THIS THING HAUL AZZ! HERE IS WHAT IVE GOT SO FAR,78 NOVA,TURBO 350,3500 STALL,4.10,28 INCH TALL TIRES.THE ENGINE HAS K BLACK #134SILVOLITE HYPERS,5.7 RODS,CAST CRANK.THE HEADS ARE ALUMINUM,200c INTAKE RUNNERS,2.02IN,1.60EX.,FULL ROLLER ROCKERS1.5,AND A HOLLEY 750VAC SEC CARB.I WANT TO GET THE BEST QUARTER MILE TIMES I CAN.I DONT NEED TO WORRY ABOUT VACUUM BECAUSE ITS GOT MANUAL BRAKES.THE CAR WILL SEE SOME PLAY ON THE STREET,BUT THE STRIP IS GONNA BE HOME.I DONT THINK I CAN GO WITH A ROLLER CAM RIGHT NOW BECAUSE OF FUNDING.I HAVE BEEN TOLD SO MANY DIFFERENT WAYS TO GO THAT IM LOST NOW.HELLLLLP!!!!! THANKS!!!!!
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance