Thread: T.P.I. projects
-
01-31-2008 09:45 PM #1
T.P.I. projects
I've got a couple of 305 t.p.i. motors that I'm going to start playing with. Does anybody know of some good tuners for these? Also, if anyone has built up one of these,I'd love to see the recipe, and how well it worked.
Thanks fellas,
AdamI ain't dumb, I just ain't been showed a whole lot!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-31-2008 10:52 PM #2
Down at the bottom of this article are 5 more build links ,for this type of motor.
http://www.goingfaster.com/spo/modthel03.html
I loosely followed build 2 at the bottom ,minus the heads.Last edited by shawnlee28; 01-31-2008 at 10:57 PM.
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project