I see my original post may have been lost, A couple of you were helping me build a 350 for my 32 Roadster, as I am not an engine guy. So here goes again from the start.

I have a 350 bored 60 over, stock cam, I have a set of 58cc heads and a set of 76cc heads. I would like this to run on pump gas without any worries if that possible with 4x2s. I have a Weiand 4x2 manifold I want to run strombergs on (looking for those also). I would like to use what I have without spending a bunch on aftermarket heads, I have some cash for a cam so recomendations would be appeciated. Other heads arent out as long as I can find them for a couple hundred bucks. I am going to run a 700r4 trans, and the rear end is a 3.00 ration from a Maverick. This is going to be a cruiser, Im not looking for big HP, just something fun. Thanks in advance to any input.