-
11-06-2007 10:31 AM #1
procomp heads for chevy small block 400
i got a set of procomp heads from a friend 190cc 64cc for 400.00.Im going to use them with my 640/.645 roller cam and springs soild lift..THE thing is do i have to do a lot of work to these heads. I was just going to get the bowl cleaned up anythings else i need to do to these heads.THANKSmeat1037
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-06-2007 05:00 PM #2
Originally Posted by demetrice askew
-
11-07-2007 08:38 AM #3
thanks i will do thatmeat1037
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project