Thread: Stage II Build Questions
-
11-02-2007 07:28 PM #1
Stage II Build Questions
I am thinking of going the 383 route this winter along with getting into some "beercan" heads. I have the 462 heads now, 2.02-1.70's. I have been looking at the Patriot aluminum heads. I can get a bare pair fairly cheap and then put all my hardware onto those, then sell my 462's. Will going to the aluminum heads and stepping up to the 383 build gonna be THAT much of a drastic change for me? Just wondering. It shouldn't be that expensive. I think the block radiusing, new pistons/rods and crank, and thats it(well.. gaskets). Right?"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project