Hi all
First i would like to ask if you can bore a 1962 chevy 327 .030 over? I was just told by a guy i work with that you cant because of the casting and not enough material the cylinders could crack. the machine shop that did my block said they bored my block .030 over to provide perfectly round cylinders.

Now here is my problem "WATER IN THE OIL" i have already tore down the top end and checked all that i could, replaced the head and intake gaskets with all edelbrock sets (have edelbrock heads and intake) and the motor runs good except for a slowly steady rise in tempature and a small amount of water in the oil when i first crack the drain plug i can fill a spray can cap halph the way before oil starts coming out, how can i check for a cracked block without taring down again?

P.S. sorry for the spelling.....