My friend wants to build a 350 engine, he bought a Crane 302 H06 camshaft not realizing it is cut on a 106 lsa, it has .500 lift and 300 duration, my question is will it run or not, if so will it run on pump gas (super)?
We were goint to build the engine to have about 10.3 to 1 compression with a dished piston, but, he desided to put a set of 40 over flat tops in it and wants to use the same small chambered heads, that way the compression will be around 11 to 12 to 1 compression, which is what the camshaft card recommends, at that compression will that crane cam run on super unleaded pump gas?