Thread: Header Temperatures
Threaded View
-
05-08-2007 03:38 PM #4
the mechanical timing was set at 8 BTDC. After letting the ECM take control, the timing goes to 23 at idle and 32 at 2000rpm. Right where it should be so the timing is fine.
The glowing headers are my concern. Does 375F sound too hot? Any oil drip onto those headers will catch fire which is bad.
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy