Results 1 to 9 of 9
LinkBack URL
About LinkBacksHybrid View
-
04-24-2007 06:54 PM #1
CHR Member
- Join Date
- Jun 2005
- Location
- Lawton/Ft. Sill, OK
- Car Year, Make, Model: '87 Chev Silverado/'72 Elky
- Posts
- 483
I already have a 3.5" crank, Scat makes it especially for the 377.
I based the deck at Zero, and I used a .045 Gasket thickness.
I also came up with an 8.76:1 Dynamic CR if that makes a difference...
-
04-24-2007 06:57 PM #2
CHR Member
- Join Date
- Jun 2005
- Location
- Lawton/Ft. Sill, OK
- Car Year, Make, Model: '87 Chev Silverado/'72 Elky
- Posts
- 483
I haven't mocked up the motor yet. All my parts are still in the boxes. The machinist mocked it up when he did the decking and boring but it's been almost a year since I had it done and I can't remember if I had him zero deck it or not.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!